[Soekris] Problem with DP8381 and crash system

Asistar srl Ivan Bolognani bolognani at asistar.it
Thu Apr 7 20:45:34 UTC 2011


I have a big problem with the driver natsemi in eth4 and eth5


The eht4 and 5 is running for 3- 4 day and after the system is crash.
In dmesg i find before the crash system this line
eth4: increased tx threshold, txcfg 0xd0f01004.
eth5: increased tx threshold, txcfg 0xd0f01006.

After 2 ­3  hours the system is crash,

I using debian with kernel 2.6.26-2-486

Kan you help me

Thenks
Ivan



This is my dmesg

dmesg |grep eth5

natsemi eth5: NatSemi DP8381[56] at 0xa4001000 (0000:01:01.0),
00:00:24:cd:1f:89, IRQ 7, port TP.
eth5: DSPCFG accepted after 0 usec.
eth5: link up.
eth5: Setting full-duplex based on negotiated link capability.
eth5: no IPv6 routers present
eth5: remaining active for wake-on-lan
eth5: DSPCFG accepted after 0 usec.
eth5: link up.
eth5: Setting full-duplex based on negotiated link capability.
eth5: no IPv6 routers present


eth4: increased tx threshold, txcfg 0xd0f01004.
eth5: increased tx threshold, txcfg 0xd0f01006.







More information about the Soekris-tech mailing list