[Soekris] Does 2.5" 1/6H hard disk fit in the net5501 standard case?
henrik at kaarposoft.dk
Sun Feb 21 23:38:30 UTC 2010
>> However, the specs say that it has form-factor 2.5" x 1/6H.
>> Will it fit in the net5501 standard case with the 2.5" HDD mounting kit?
> I don't think so, it's really pretty tight in there.
> But if you do not need the PCI expansion slot, you could simply bolt
> the disk down over on that side of the cabinet by drilling four
> holes in the bottom of the cabinet.
> Or, for more "interrim" installation: a couple of shots with the
> glue-gun or a wad of double-stick tape...
Sounds like a good solution (bolting it on the PCI side of the cabinet,
that is; not the double-stick tape :-))
I guess I should just go ahead and order the thing, and see if I can get
it to work...
More information about the Soekris-tech