[Soekris] Openvox A400P11 card in NET5501?

[Martin Johnson]

Hi,

Has anyone successfully used an Openvox A400P11 card with a NET5501?
I'd like to try this with AskoziaPBX.

The A400P card is a similar to Digium's TDM410, but roughly half the
cost.  The A400P11 bundle comes with 1 FXO module and 1 FXS module.

During calls, the A400P11 needs about 4 watts of power at 12V via a
4-pin Molex (3.5" HDD-style) connector.  Can that power be drawn from
JP10 pin 3 on the NET5501, if I supply 12V into J5?  Am I correct in
assuming that the centre pin of J5 is wired to pin 3 on JP10?

Thanks for any pointers!

- Martin