[Soekris] USB 1.1 or 2?
Luis Daniel Lucio Quiroz
luis.daniel.lucio at gmail.com
Sun Jan 11 23:02:53 UTC 2009
Whell,
iti is generic-ide, it uses irq15 but it does not have irq share, so usb and
ide1 are fighting for it.
What ide driver should I use then?
Regards,
LD
On Tuesday 06 January 2009 09:47:18 JFS wrote:
> Lo,
>
> On Tue, Jan 06, 2009 at 09:18:28AM -0600, Luis Daniel Lucio Quiroz wrote:
> > I just bought a usb2 soy memory and I have this output:
>
> [snip]
>
> Strange...
>
> I've not the same output here, with pure Debian Lenny stock kernel :
>
> Linux net5501 2.6.26-1-686 #1 SMP Thu Oct 9 15:18:09 UTC 2008 i586
> GNU/Linux
>
> > with dmesg, in a soekris net5501.
>
> Here is mine, (usb part of -) :
>
> [ 6.931454] usbcore: registered new interface driver usbfs
> [ 6.940252] usbcore: registered new interface driver hub
> [ 7.005505] usbcore: registered new device driver usb
> [ 7.024599] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller
> (OHCI) Driver [ 7.024833] PCI: Setting latency timer of device
> 0000:00:15.0 to 64 [ 7.024870] ohci_hcd 0000:00:15.0: OHCI Host
> Controller
> [ 7.030390] ohci_hcd 0000:00:15.0: new USB bus registered, assigned bus
> number 1 [ 7.037858] ohci_hcd 0000:00:15.0: irq 15, io mem 0xa0005000
> [ 7.056271] libata version 3.00 loaded.
> [ 7.128562] usb usb1: configuration #1 chosen from 1 choice
> [ 7.134311] hub 1-0:1.0: USB hub found
> [ 7.138171] hub 1-0:1.0: 4 ports detected
> [ 7.245165] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001 [ 7.251999] usb usb1: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1 [ 7.259250] usb usb1: Product: OHCI Host
> Controller
> [ 7.264159] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
> [ 7.270108] usb usb1: SerialNumber: 0000:00:15.0
> [ 7.279515] PCI: Setting latency timer of device 0000:00:15.1 to 64
> [ 7.279557] ehci_hcd 0000:00:15.1: EHCI Host Controller
> [ 7.284418] ehci_hcd 0000:00:15.1: new USB bus registered, assigned bus
> number 2 [ 7.313485] ehci_hcd 0000:00:15.1: irq 15, io mem 0xa0006000
> [ 7.330233] ehci_hcd 0000:00:15.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004 [ 7.336635] usb usb2: configuration #1 chosen from 1 choice
> [ 7.342401] hub 2-0:1.0: USB hub found
> [ 7.346205] hub 2-0:1.0: 4 ports detected
> [ 7.452917] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0002 [ 7.459749] usb usb2: New USB device strings: Mfr=3,
> Product=2, SerialNumber=1 [ 7.467000] usb usb2: Product: EHCI Host
> Controller
> [ 7.471904] usb usb2: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
> [ 7.477853] usb usb2: SerialNumber: 0000:00:15.1
>
> > lsusb does not report nothing.
>
> net5501:~# lsusb
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> (Same kernel, of course).
>
> > lspci output is this:
>
> Sorry, not installed, but I can install it if you want.
>
> > do I missing something? Can anyone running linux list what modules do
> > you have loaded?
>
> net5501:~# lsmod
> Module Size Used by
> ipv6 235300 12
> dm_snapshot 14340 0
> dm_mirror 15104 0
> dm_log 8452 1 dm_mirror
> dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
> loop 12748 0
> evdev 8000 0
> snd_pcsp 8576 0
> geode_aes 5608 0
> snd_pcm 62628 1 snd_pcsp
> crypto_blkcipher 15236 1 geode_aes
> snd_timer 17800 1 snd_pcm
> snd 45604 3 snd_pcsp,snd_pcm,snd_timer
> soundcore 6368 1 snd
> snd_page_alloc 7816 1 snd_pcm
> cs5535_gpio 3772 0
> geode_rng 1920 0
> rng_core 3940 1 geode_rng
> ext3 105256 1
> jbd 39444 1 ext3
> mbcache 7108 1 ext3
> ide_disk 10496 3
> ide_pci_generic 3908 0 [permanent]
> amd74xx 7752 0 [permanent]
> ide_core 96168 3 ide_disk,ide_pci_generic,amd74xx
> ata_generic 4676 0
> ehci_hcd 28428 0
> ohci_hcd 18500 0
> libata 140384 1 ata_generic
> usbcore 118160 3 ehci_hcd,ohci_hcd
> scsi_mod 129356 1 libata
> dock 8272 1 libata
> via_rhine 18664 0
> mii 4896 1 via_rhine
> thermal_sys 10856 0
>
>
>
> Here at least, it seems to be 2.0.
>
> HIH,
More information about the Soekris-tech
mailing list