[Soekris] net4511 and POST's steps

Bill Maas bill at stsx.org
Wed Nov 26 15:06:51 UTC 2008


Hi Alexander,

does the boot sequence completely stop after this message or does it go
into an endless reboot sequence?. In the latter case you may need a more
powerful PSU.

I had a similar problem recently with a net5501 and I found that while
its nominal power usage with a [more or less] idle OS and no extra cards
attached is 5.7W-6.3W, right after poweron there's a temporary surge
towards almost 9W. All works well here after swichting to a 12V 1.25A
CUI Inc. EPA-151DA-12 PSU obtained from kd85.com.

Bill


On Mon, 2008-11-24 at 21:58 +0200, Alexander Pogrebny wrote:
> Hi!
> Eight boards from our last order (hundred of net4511) are broken. All
> boards was with BIOS v1.33.
> They's POST stops at:
> 
> POST: 012345689bcefgh*-03-
> 
> Maybe someone can tell, where we should find the problem.
> We just want to try repair them for getting them faster to work.
> 
> 
> --
> Alexander Pogrebny
> engineer
> Unidata, Ukraine
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech



More information about the Soekris-tech mailing list