[Soekris] asking about voltage and temperature monitoring soekris net 4801

[komang adi]

Hi..
I'm komang,
i'm trying to monitor the condition of the voltage and temperature of the
soekris net4801 using lm-sensors, but i just find the link about that at
http://www.linuxvillage.ca/support/soekris4801.html#sensor_conf, but the
output just like this :
root at relay:/home/relay# sensors
pc87366-isa-6620
Adapter: ISA adapter
VCORE:       +0.00 V  (min =  +1.90 V, max =  +2.10 V)
VCC:         +0.00 V  (min =  +0.00 V, max =  +0.00 V)
VPWR:        +0.00 V  (min =  +5.93 V, max = +28.02 V)
+12V:        +0.00 V  (min = +11.02 V, max = +13.01 V)
ERROR: Can't get value of subfeature in5_input: No such subfeature known
ERROR: Can't get value of subfeature in5_max: No such subfeature known
ERROR: Can't get value of subfeature in5_min: No such subfeature known
-12V:        +0.00 V  (min =  +0.00 V, max =  +0.00 V)
GND:         +0.00 V  (min =  +0.00 V, max =  +0.00 V)
Vsb:         +6.03 V  (min =  +3.00 V, max =  +3.59 V)
Vdd:         +6.03 V  (min =  +3.00 V, max =  +3.59 V)
Vbat:        +0.00 V  (min =  +2.40 V, max =  +3.01 V)
AVdd:        +6.03 V  (min =  +3.00 V, max =  +3.59 V)
Temp:       -128.0 C  (low  =  +0.0 C, high = +70.0 C)
                      (crit = +85.0 C)
cpu0_vid:   +0.000 V

there is not all the data appear. Anyone can help about this?
Or have some references about voltage and temperature monitoring.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20080522/df1da733/attachment.html