[Soekris] Fwd: Serial

[René Luckow]

Soekris also sells serial cables on a PCI bracket now :)

On Wed, May 14, 2008 at 7:05 PM, Guy F. Boyd
<soekris.support.list at vta.com> wrote:
>
>  >
> > > How do most people here deal with adding a second external serial
> > > connector?  Does everybody just grind out a section of the case?
> > >
> >       I neatly fold the cable in the case so that it JUST puts the
> > connector at the lip of the back, then CAREFULLY slide the case over
> > it. The 1's and 0's do seem to come out flatter, but the Soekris
> > apparently can straighten them out internally before passing to my
> > OS. ;)
>
> .... and if you're doing a net5501 with the standard case and you're not
> stuffing the add-in card slot, check out www.pccables.com or similar. Part #
> 07121 (DTK) or part # 07106  with your own stuffing works here just dandy. ( and
> if you're being creative with where the stuff on the add-in card terminates, you
> might even be able to  use them *with* an add in card, who knows. ) They also
> have some filler panels with the 9 pin port shape punched out twice for a 2-up
> arrangement for a USB serial  and  a legacy serial side-by side -ish ( sorry
> part number not handy )
>
> Thread the bottom of the filler panel with an 8-32 tap and you can use the hole
> cover screw on the end close to the board for a nice snug fit.
>
> Disclaimer: I have no affiliation with pccables.com, "I just play one on TV".
> :-)
>
> Guy Boyd
> Film Systems LLC
> Atlanta GA USA
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech



--
Kind regards

René Luckow



-- 
Kind regards

René Luckow