[Soekris] USB port recognized but non-functional on net5501

[Guy F. Boyd]

</snip>
> At 08:21 PM 3/22/2008, Mike Kelly wrote:
>
> >Is there any trick to getting this to work, or could I have
> a bad board?
> >  Everything else on the board appears to work properly.
>
> Havent tried the 5501s on LINUX, but I do know they work under
> FreeBSD.  If you can, try it as it should work.  We have a fair
> number in the field that have apc upses hooked up via USB and they
> work just fine
>
</snip>

A-OK over here..
net5501 S/N 158352
FreeBSD 6.2-Release #8:

usbdevs -v

Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), AMD(0x0000),
rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), AMD(0x0000),
rev 1.00
 port 1 addr 2: high speed, power 200 mA, config 1, U3 Cruzer Micro(0x5406),
SanDisk Corporation(0x0781), rev 0.10
 port 2 powered
 port 3 powered
 port 4 powered

Also just shipped 2 with later S/Ns to my customers that stress tested just fine
with various FTDI USB devices that we use here, no problems.

HTH

G. F. Boyd
Atlanta, USA