[Soekris] USB port recognized but non-functional on net5501

[Henrik Brix Andersen]

On Sat, Mar 22, 2008 at 05:21:53PM -0700, Mike Kelly wrote:
> Is there any trick to getting this to work, or could I have a bad
> board? Everything else on the board appears to work properly.

Does the USB devices which have built-in LEDs "light up"? Have you
tried meassuring the voltage between pin 1 WRT pin 4 on the USB
connector? It should be 5V when the bus is powered up.

Brix
-- 
Henrik Brix Andersen <henrik at brixandersen.dk>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 217 bytes
Desc: not available
Url : http://lists.soekris.com/pipermail/soekris-tech/attachments/20080324/032de1f7/attachment.bin