[Soekris] PXE Boot Problem

[ripemd160]

Hi Community,

My Hardware:

Board:    net5501 - 500 MHz - 512 MB RAM - BIOS 1.33
HDD:      IBM 2,5" - IC25N030ATCS04-0 - 29302 Mbyte

i have a little trouble with my net5501. I want to install IPCop via PXE
with TFTPD32. The following Settings to TFTPD32 were set:

http://www.nabble.com/file/p16031312/TFTPD32_001_Settings.png 

DHCP as follows:

http://www.nabble.com/file/p16031312/TFTPD32_002_DHCP.png 

http://www.snapdrive.net/files/114283/Soekris/PXE.wmv Video from net5501
boot 

Please see the Video what is happened after starting PXE-Boot. DHCP is well
done but after the initial IPCop-Screen should be appearing only 15
Characters are shown scrolling down. Reading the screen is horrible. Which
settings are wrong or what settings i have to set (or forget)? I test the
TFTPD32 with my Laptop and all is fine (Display and starting the IPCop
installation).

I downgraded the BIOS from 1.33 to 1.32i but the same effect. Anyway i
upgrade to 1.33 .


Thanx for help

RipeMD
-- 
View this message in context: http://www.nabble.com/PXE-Boot-Problem-tp16031312p16031312.html
Sent from the Soekris - Technical mailing list archive at Nabble.com.