[Soekris] Can find CF but can't find SATA
Ali Mdidech
a.mdidech at openchange.org
Tue Mar 11 17:18:25 UTC 2008
Hi John,
Try to set the flash card as secondary then reboot :
set flash=secondary
Cheers,
John Cox a écrit :
> Hi
>
> Just received my 5501-70. It comes with BIOS 1.33 and (unlike many
> others on this list) has no problems at all seeing and booting off the
> 8G Sandisk Extreme III CF card I fitted. However it refuses point-blank
> to see the WD 320G SATA HD I fitted. It doesn't appear on the device
> listing at the beginning and is marked "ignored (disabled)" when OpenBSD
> has a go. I mangled the supplied SATA lead when removing it from the
> mounting kit so I'm using a random SATA lead that I had lying around. I
> can see the drive and it appears to work if I plug the SATA lead into my
> PC (leaving it powered by the 5501) so its not the power, lead or the
> drive. Is there something you have to set to get the 5501 to look at
> the SATA? (I want it to boot from the CF like it does at the moment but
> to have the HD for bulk storage.)
>
> Any clues? I enclose a boot log in case it helps.
>
> Thanks
>
> John Cox
>
>
> Drive is a Western Digital 320GB Scorpio 5400RPM S150 8MB 2.5"
> mfr#: WD3200BEVT
>
> Boot log (some control chars removed):
>
>
> POST: 012345689bcefghips1234ajklnopqr,,,tvwxy
>
> comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris
> Engineering.
>
> net5501
>
> CPU Geode LX 500 Mhz
> 0000 Mbyte Memory
> 0512
>
> Pri Mas SanDisk SDCFX3-8192 LBA Xlt 996-255-63 8003 Mbyte
>
> Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
> -------------------------------------------------------------------
> 0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
> 0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
> 0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
> 0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
> 0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
> 0:14:0 8086 1074 02000005 0117 8230 08 40 00 A0020000 A0140000 10
> 0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
> 0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
> 0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A01E0000 00000000 15
> 0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A01E1000 00000000 15
>
> Seconds to automatic boot. Press Ctrl-P for entering Monitor.
> Using drive 0, partition 3.
> Loading...
> probing: pc0 com0 com1 pci mem[639K 511M a20=on]
>
> disk: hd0+
>
>
>>> OpenBSD/i386 BOOT 3.01
>>>
>
> com0: 9600 baud
>
> switching console to com0
>
>
>>> OpenBSD/i386 BOOT 3.01
>>>
>
> boot>
>
> booting hd0a:/bsd: 5913424|[52+306864+287943]=0x72a4d4
>
> entry point at 0x200120ªÿ
>
> [ using 595232 bytes of bsd ELF symbol table ]
>
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>
> The Regents of the University of California. All rights
> reserved.
>
> Copyright (c) 1995-2008 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
>
> OpenBSD 4.3 (GENERIC) #696: Thu Mar 6 05:09:01 MST 2008
>
> deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>
> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
> 586-class) 500 MHz
>
> cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
>
> real mem = 536440832 (511MB)
>
> avail mem = 510664704 (487MB)
>
> mainbus0 at root
>
> bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40
>
> pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
>
> pcibios0: pcibios_get_intr_routing - function not supported
>
> pcibios0: PCI IRQ Routing information unavailable.
>
> pcibios0: PCI bus #0 is the last bus
>
> bios0: ROM list: 0xc8000/0xa800
>
> cpu0 at mainbus0
>
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>
> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
>
> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
>
> vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
> address 00:00:24:c9:a7:30
>
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
>
> vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
> address 00:00:24:c9:a7:31
>
> ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
>
> vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
> address 00:00:24:c9:a7:32
>
> ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
>
> vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
> address 00:00:24:c9:a7:33
>
> ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
>
> vendor "Intel", unknown product 0x1074 (class network subclass ethernet,
> rev 0x05) at pci0 dev 14 function 0 not configured
>
> glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0,
> 32-bit 3579545Hz timer, watchdog, gpio
>
> gpio0 at glxpcib0: 32 pins
>
> pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
>
> wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFX3-8192>
>
> wd0: 4-sector PIO, LBA, 7815MB, 16007040 sectors
>
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
>
> pciide0: channel 1 ignored (disabled)
>
> ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 15,
> version 1.0, legacy support
>
> ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 15
>
> usb0 at ehci0: USB revision 2.0
>
> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
>
> isa0 at glxpcib0
>
> isadma0 at isa0
>
> pckbc0 at isa0 port 0x60/5
>
> pckbd0 at pckbc0 (kbd slot)
>
> pckbc0: using irq 1 for kbd slot
>
> wskbd0 at pckbd0: console keyboard
>
> pcppi0 at isa0 port 0x61
>
> midi0 at pcppi0: <PC speaker>
>
> spkr0 at pcppi0
>
> nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 10: GPIO VLM TMS
>
> gpio1 at nsclpcsio0: 29 pins
>
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>
> pccom0: console
>
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>
> usb1 at ohci0: USB revision 1.0
>
> uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
>
> biomask e5c5 netmask ffe5 ttymask ffe7
>
> mtrr: K6-family MTRR support (2 registers)
>
> softraid0 at root
>
> root on wd0a swap on wd0b dump on wd0b
>
> Automatic boot in progress: starting file system checks.
> /dev/rwd0a: file system is clean; not checking
> /dev/rwd0h: file system is clean; not checking
> /dev/rwd0d: file system is clean; not checking
> /dev/rwd0g: file system is clean; not checking
> /dev/rwd0e: file system is clean; not checking
> setting tty flags
> starting network
> DHCPREQUEST on vr0 to 255.255.255.255 port 67
> DHCPACK from 10.44.0.2
> bound to 10.44.1.9 -- renewal in 21600 seconds.
> starting system logger
> starting initial daemons:.
> savecore: /dev/wd0b: Device not configured
> checking quotas: done.
> building ps databases: kvm dev.
> clearing /tmp
> starting pre-securelevel daemons:.
> setting kernel security level: kern.securelevel: 0 -> 1
> creating runtime link editor directory cache.
> preserving editor files
> starting network daemons: sendmail inetd sshd.
> starting local daemons:.
> standard daemons: cron.
> Tue Aug 28 21:44:35 BST 2007
>
> OpenBSD/i386 (yidhra.outer.uphall.net) (tty00)
>
> login: 00
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>
--
Ali Mdidech
OpenChange Project
http://www.openchange.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20080311/4c53522f/attachment.html
More information about the Soekris-tech
mailing list