[Soekris] Problem upgrading 5501 firmware

[Zlatko Ignjatovic]

Hey,

I'm using Windows vista and Hyper terminal Private edition 6.3 to perform
the upgrade.

I've used this same terminal emulator and OS to upgrade BIOS on soekris
boards in past woithout any issues.

Regards,

Zlatko Ignjatović

-----Original Message-----
From: Wim Vandeputte - Mailinglists only <bunbun at togetic.kd85.com>
To: Zlatko Ignjatovic <klaja at intertalk.com>
Date: Wed, 25 Jun 2008 21:04:17 +0200
Subject: Re: [Soekris] Problem upgrading 5501 firmware

> 
> You should at least show a screen capture and explain what platforms
> you are using... minicom on Linux, cu on OpenBSD?
> 
> For example:
> 
> http://soekris.kd85.com/flashupdate_4801
> 
> 
> On Wed, Jun 25, 2008 at 08:56:50PM +0200, Zlatko Ignjatovic wrote:
> > Hi,
> > 
> > Just wondered if anyone experiences the same issue.
> > 
> > I have a 5501 board with 1.32i on it.
> > 
> > I cannot upgrade it to 1.33, when I issue ???download??? in monitor,
> CCCCC
> > letters start showing in the monitor (as they should), but when I try
> to
> > upload the 1.33 image, the process is immediately stopped.
> > 
> > I???ve tried to upgrade, since I have some issue with the box ???
> after
> > bootup, very often the box does not boot, but end up in monitor.
> > 
> > Regards,
> > 
> > Zlatko
> > 
> > 
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech