[Soekris] Soekris net5501-70 : OpenBSD 4.3, cannot register compatflash wd0 as root device
DarkSoul
darksoul at darkbsd.org
Mon Jul 28 13:05:02 UTC 2008
Hello,
My apologies for the double mailing, I had omitted posting full boot
traces for the two scenarios I described in my previous e-mail :
DarkSoul wrote:
> Hello,
>
> I just tried installing OpenBSD 4.3 on my Soekris, using a 2G Compact
> Flash card (which is detected by bsd.rd kernel fine since I can install
> on it), and the problem I have is that a 4.3 kernel does detect wd0 but
> does not make it available as root device option.
>
<SNIPPED, see below for complete OpenBSD 4.3 trace>
>
> I have tested an OpenBSD 4.2 kernel, and while the system does not
> completely boot because of obvious userland incompatibility, it does
> register wd0a as boot device and proceed to booting.
>
> I have been told deactivating ACPI during kernel configuration (using
> "boot /bsd -c" followed by "disable acpi") would change something, but
> to no avail so far.
>
> Is this a misconfiguration error for the 4.3 kernel, or a setting I
> forgot to apply, or a bug?
>
> If needed, I am willing to downgrade to OpenBSD 4.2, but I would
> appreciate any input on this problem if anyone also encountered it,
> before giving up.
>
> Thanks in advance,
Boot trace for OpenBSD 4.3 kernel :
----Trace starts here-------------------------------------------
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy
comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris Engineering.
net5501
0512 Mbyte Memory CPU Geode LX 500 Mhz
Pri Mas SanDisk SDCFH2-002G LBA Xlt 992-64-63 2001 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:17:0 14E4 4320 02800002 0106 0010 00 40 00 A0006000 00000000 15
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0008000 00000000 07
0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0009000 00000000 07
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[639K 511M a20=on]
disk: hd0+
>> OpenBSD/i386 BOOT 3.01
switching console to com0
>> OpenBSD/i386 BOOT 3.01
com0: changing speed to 19200 baud in 5 seconds, change your terminal to
match!
com0: 19200 baud
boot>
booting hd0a:/bsd: 5913424+1004644 [52+306864+287943]=0x72a4d4
entry point at 0x200120��
[ using 595232 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2008 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.3 (GENERIC) #698: Wed Mar 12 11:07:05 MDT 2008
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 536440832 (511MB)
avail mem = 510664704 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:ca:b0:90
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:ca:b0:91
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:ca:b0:92
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:ca:b0:93
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
bwi0 at pci0 dev 17 function 0 "Broadcom BCM4306" rev 0x02: irq 15,
address 00:90:4b:7c:fb:6a
glxpcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03: rev 0,
32-bit 3579545Hz timer, watchdog, gpio
gpio0 at glxpcib0: 32 pins
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wiy
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH2-002G>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
Data modified on freelist: word 0 of object 0xd1173980 size 0x48
previous type free (0x0 != 0xefffeecc)
isa0 at glxpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio1 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
biomask ffe5 netmask ffe5 ttymask ffe7
mtrr: K6-family MTRR support (2 registers)
softraid0 at root
root device: wd0a
use one of: exit
root device: exit
syncing disks... done
----Trace stops here--------------------------------------------
Boot trace for OpenBSD 4.2 kernel (since it has a 4.3 userland, of
course, it can't boot) :
----Trace starts here-------------------------------------------
POST: 012345689bcefghips1234ajklnopqr,,,tvwxy
comBIOS ver. 1.33 20070103 Copyright (C) 2000-2007 Soekris Engineering.
net5501
0512 Mbyte Memory CPU Geode LX 500 Mhz
Pri Mas SanDisk SDCFH2-002G LBA Xlt 992-64-63 2001 Mbyte
Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int
-------------------------------------------------------------------
0:01:2 1022 2082 10100000 0006 0220 08 00 00 A0000000 00000000 10
0:06:0 1106 3053 02000096 0117 0210 08 40 00 0000E101 A0004000 11
0:07:0 1106 3053 02000096 0117 0210 08 40 00 0000E201 A0004100 05
0:08:0 1106 3053 02000096 0117 0210 08 40 00 0000E301 A0004200 09
0:09:0 1106 3053 02000096 0117 0210 08 40 00 0000E401 A0004300 12
0:17:0 14E4 4320 02800002 0106 0010 00 40 00 A0006000 00000000 15
0:20:0 1022 2090 06010003 0009 02A0 08 40 80 00006001 00006101
0:20:2 1022 209A 01018001 0005 02A0 08 00 00 00000000 00000000
0:21:0 1022 2094 0C031002 0006 0230 08 00 80 A0008000 00000000 07
0:21:1 1022 2095 0C032002 0006 0230 08 00 00 A0009000 00000000 07
1 Seconds to automatic boot. Press Ctrl-P for entering Monitor.
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[639K 511M a20=on]
disk: hd0+
>> OpenBSD/i386 BOOT 3.01
switching console to com0
>> OpenBSD/i386 BOOT 3.01
com0: changing speed to 19200 baud in 5 seconds, change your terminal to
match!
com0: 19200 baud
boot> boot /bsd42
booting hd0a:/bsd42: 5665588+872060 [52+291168+272312]=0x6c5c70
entry point at 0x200120��
[ using 563904 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD"
586-class) 500 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX
real mem = 536440832 (511MB)
avail mem = 511070208 (487MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/70/03, BIOS32 rev. 0 @ 0xfac40
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x31
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 6 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11,
address 00:00:24:ca:b0:90
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr1 at pci0 dev 7 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 5,
address 00:00:24:ca:b0:91
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr2 at pci0 dev 8 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 9,
address 00:00:24:ca:b0:92
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
vr3 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 12,
address 00:00:24:ca:b0:93
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
0x004063, model 0x0034
"Broadcom BCM4306" rev 0x02 at pci0 dev 17 function 0 not configured
pcib0 at pci0 dev 20 function 0 "AMD CS5536 ISA" rev 0x03
pciide0 at pci0 dev 20 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wiy
wd0 at pciide0 channel 0 drive 0: <SanDisk SDCFH2-002G>
wd0: 4-sector PIO, LBA, 1953MB, 4001760 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 21 function 0 "AMD CS5536 USB" rev 0x02: irq 7,
version 1.0, legacy support
ehci0 at pci0 dev 21 function 1 "AMD CS5536 USB" rev 0x02: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: AMD EHCI root hub, rev 2.00/1.00, addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS
gpio0 at nsclpcsio0: 29 pins
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
usb1 at ohci0: USB revision 1.0
uhub1 at usb1: AMD OHCI root hub, rev 1.00/1.00, addr 1
biomask e5c5 netmask ffe5 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: K6-family MTRR support (2 registers)
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
Automatic boot in progress: starting file system checks.
/dev/rwd0a: 14748 files, 215509 used, 768002 free (74 frags, 95991
blocks, 0.0% fragmentation)
/dev/rwd0a: MARKING FILE SYSTEM CLEAN
setting tty flags
net.inet6.ip6.accept_rtadv: 0 -> 1
starting network
starting system logger
starting initial daemons:.
savecore: /dev/wd0b: Device not configured
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files
starting network daemons: sendmail inetd sshd.
starting local daemons:.
standard daemons: cron.
Tue Jul 29 06:58:05 JST 2008
----Trace stops here--------------------------------------------
Thanks in advance,
--
Stephane LAPIE, EPITA SRS, Promo 2005
"Even when they have digital readouts, I can't understand them."
--MegaTokyo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 252 bytes
Desc: OpenPGP digital signature
Url : http://lists.soekris.com/pipermail/soekris-tech/attachments/20080728/a7fca4b9/signature.bin
More information about the Soekris-tech
mailing list