[Soekris] Net5501 Second USB Port

[Marc Balmer]

Steven Finnegan wrote:
> Does anybody know for sure which internal header is used for the  
> second USB port on the 5501?
> 
> Previous threads have indicated that JP7 (between the console and  
> power connections) is the port, but voltage measurements there don't  
> make sense.
> Assuming that pin 1 is nearest the JP7 designator, the voltages are  
> 3.23v, 0v, 3.23v, 3.23v respectively. I am presuming the wiring would be
> according to the USB pinout with pin 1-VCC, 2-Data-, 3-Data+, 4-GND.
> 
> However, JP8 (with a labeled pin 1) has much more reasonable  
> measurements, 1-4.9v, 2-0v, 3-0v, 4-0v
> 
> Can someone verify?

It's just hilarious (and arrogant) that
Soekris does not provide a system manual.

> 
> Thanks,
> sjf
> 
> 
> 
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech


-- 
        SELECT services FROM companies WHERE name = 'micro systems'

marc balmer, micro systems, wiesendamm 2a, postfach, ch-4019 basel
internet www.msys.ch, phone +41 61 383 05 10, fax +41 61 383 05 12