[Soekris] PXE Tiny screen

[Jonathon Exley]

Maybe there are ANSI codes in the boot menu that are affecting your
terminal emulator? 


Jonathon


-----Original Message-----
From: soekris-tech-bounces at lists.soekris.com
[mailto:soekris-tech-bounces at lists.soekris.com] On Behalf Of Johannes
Bauer
Sent: Monday, 25 August 2008 10:12
To: soekris-tech at lists.soekris.com
Subject: [Soekris] PXE Tiny screen

Hi list,

I'm trying to PXE boot a 4801 with 1.33 BIOS. It boots up alright, DHCP
and TFTP work, but then the console output is crippled to a 1x15
character line. How can I change this? Here's what it looks like:

----8<--------8<--------8<--------8<--------8<--------8<--------8<----
 > boot f0

NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 

Copyright (C) 2002, 2003 National Semiconductor Corporation All rights
reserved.

Pre-boot eXecution Environment  PXE-2.0 (build 082) Copyright (C)
1997-2000  Intel Corporation


CLIENT MAC ADDR: 00 00 24 C2 3F E0
CLIENT IP: 192.168.1.9  MASK: 255.255.255.0  DHCP IP: 192.168.1.36 

GATEWAY IP: 192.168.1.1
memtestux.cfg/d 

----8<--------8<--------8<--------8<--------8<--------8<--------8<----

The very last line:
memtestux.cfg/d
^^^^^^^^^^^^^^^^

Is where all output (boot.txt and so on) appears. I know that it's
getting the correct output as I have logged the minicom transfer and
that looks fine. Only output is scrambled.

Any ideas?

Regards,
Johannes
_______________________________________________
Soekris-tech mailing list
Soekris-tech at lists.soekris.com
http://lists.soekris.com/mailman/listinfo/soekris-tech