[Soekris] Net 5501 and sensors

[Matteo Basso - Net Stop Snc]

Hello,
I'm compiling a good&working Linux kernel for Net 5501 and I've some 
problem with sensors, I'm using 2.6.22.6 kernel (from source) + 
lm-sensors 1:2.10.1-3 in a Debian Box. Same problems with default Debian 
  kernel!!!
According to voyage list [1] I've write my .config like this:

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y

After reboot I configure lm-sensors with sensors-detect and load module 
pc87360 (according to sensors-detect) but sensors don't work.
Punky on voyage list have this module pc87366-isa-6620 but on my 
configuration I've only:
Size  Used by Module
eeprom                  7568  0
pc87360                18704  0
hwmon_vid               2944  1 pc87360
i2c_isa                 5248  1 pc87360
i2c_dev                 7940  0
i2c_core               26128  4 eeprom,pc87360,i2c_isa,i2c_dev
geode_aes               6020  0

dmesg on i2c:
AMD Geode RNG detected
nsc_gpio initializing
cs5535_gpio: base=0x6100 mask=0xb003c66 major=253
sc1200wdt: build 20020303
sc1200wdt: io parameter must be specified
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 
sec (nowayout= 0)
geode-aes: GEODE AES engine enabled.
-----After modprobing modules-----
i2c-adapter i2c-9191: ISA main adapter registered
pc87360: Device 0x09 not activated
i2c-adapter i2c-9191: Driver pc87360 registered
i2c-adapter i2c-9191: client [pc87366] registered with bus id 9191-6620
i2c-core: driver [eeprom] registered

Anyone have this problem? Tips for solutions? I'm writing now new kernel 
.config but I don't find a solution!
I suppose the problem is around lm-sensors! I'm sad for DMA and I'm 
waiting for a new bios...

Thanks, Matteo


[1] http://www.mail-archive.com/voyage-linux@list.voyage.hk/msg01399.html
-- 
Matteo Basso
email: matteo [at] netstop.it / www.netstop.it / www.kraba.it
Net Stop Snc - Soluzioni Informatiche
Str. Statale Sup. 11 verso VR, 257
36100 Vicenza (VI) - Italy
Tel. +39 0444 521129
Fax. +39 0444 809885