[Soekris] +12V power on net5501 + Digium TDM400P

[Graham Freeman]

On 16 Oct 07, at 14:15, Brandon Black wrote:

> Thanks for the info/confirmation.  I had already begun making the
> cable while I was waiting.  Here's a crappy cellphone snapshot of the
> cable I made to power the TDM400P via that power connector, in case
> anyone else is looking for the same info again:
>
> http://picasaweb.google.com/blblack/Tech/photo#5122043956008579170
>
> -- Brandon


Howdy,

Very cool.  I ditched the desktop development PC - too noisy - and  
now I'm back to wanting to use my TDM400P in my Soekris net5501.  (I  
want to trunk the two extensions over an OpenVPN connection from my  
colocated PBXes to my a home/office PBX on the Soekris.)

So, your power solution looks pretty good to me.   Thanks for posting  
the photo and details!

...off to see if Santa Cruz Electronics has any of those pre-made,  
since it's been fifteen years since I soldered anything...


Graham Freeman
General Manager, Cernio Technology Cooperative
Email/Jabber:  graham.freeman at cernio.com
+1 415 462 2991
http://cernio.com/cooperative/