[Soekris] Net5501 doesn't boot from HDU

[Dorian Büttner]

Recently saw in another thread that there now is an opportunity to set FLASH 
Secondary in the comBios.
That did it in my case.

On Friday 02 November 2007 14:03:10 René Luckow wrote:
> I don't know what PSU you're using, but maybe it just can't handle the
> load?
>
> On Nov 2, 2007 12:30 PM, Dorian Büttner <dorian.buettner at gmx.de> wrote:
> > On Tuesday 30 October 2007 23:43:07 Jed Clear wrote:
> > > On Tue, 30 Oct 2007, Marco A. Calamari wrote:
> > > > I configured Linux+Grub on the 5501 booting without hassle from a
> > > >  1GB CF. Today I added a tested Hitachi HDU with
> > > >  the ATA mounting kit
> > > >
> > > > The bios is a 1.32i and the HDU is cable select, as
> > > >  describet in a thread of this list.
> > > >
> > > > Pri Mas  Flash Card                      LBA Xlt 1007-32-63  1015
> > > > Mbyte Pri Sla  Hitachi HTS541680J9AT00         LBA Xlt 1024-255-63 
> > > > 78 Gbyte
> > >
> > > I seem to recall reading of some limitation where you could use CF or
> > > ATA, but not both.  Not certain it was the net5501 either.  But check
> > > the archives for Soren's posts.
> > >
> > > Or just try removing the CF.
> > >
> > > -Jed
> > > _______________________________________________
> > > Soekris-tech mailing list
> > > Soekris-tech at lists.soekris.com
> > > http://lists.soekris.com/mailman/listinfo/soekris-tech
> >
> > same prob...apart from the CF Manfacturere which is SanDisc in my case.
> >
> > http://lists.soekris.com/pipermail/soekris-tech/2007-October/013132.html
> >
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech