[Soekris] Net5501 doesn't boot from HDU

[René Luckow]

I don't know what PSU you're using, but maybe it just can't handle the load?

On Nov 2, 2007 12:30 PM, Dorian Büttner <dorian.buettner at gmx.de> wrote:
>
> On Tuesday 30 October 2007 23:43:07 Jed Clear wrote:
> > On Tue, 30 Oct 2007, Marco A. Calamari wrote:
> > > I configured Linux+Grub on the 5501 booting without hassle from a
> > >  1GB CF. Today I added a tested Hitachi HDU with
> > >  the ATA mounting kit
> > >
> > > The bios is a 1.32i and the HDU is cable select, as
> > >  describet in a thread of this list.
> > >
> > > Pri Mas  Flash Card                      LBA Xlt 1007-32-63  1015 Mbyte
> > > Pri Sla  Hitachi HTS541680J9AT00         LBA Xlt 1024-255-63  78 Gbyte
> >
> > I seem to recall reading of some limitation where you could use CF or ATA,
> > but not both.  Not certain it was the net5501 either.  But check the
> > archives for Soren's posts.
> >
> > Or just try removing the CF.
> >
> > -Jed
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech
>
> same prob...apart from the CF Manfacturere which is SanDisc in my case.
>
> http://lists.soekris.com/pipermail/soekris-tech/2007-October/013132.html
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>



-- 
Kind regards

René Luckow