[Soekris] Net5501 doesn't boot from HDU

[Dorian Büttner]

On Tuesday 30 October 2007 23:43:07 Jed Clear wrote:
> On Tue, 30 Oct 2007, Marco A. Calamari wrote:
> > I configured Linux+Grub on the 5501 booting without hassle from a
> >  1GB CF. Today I added a tested Hitachi HDU with
> >  the ATA mounting kit
> >
> > The bios is a 1.32i and the HDU is cable select, as
> >  describet in a thread of this list.
> >
> > Pri Mas  Flash Card                      LBA Xlt 1007-32-63  1015 Mbyte
> > Pri Sla  Hitachi HTS541680J9AT00         LBA Xlt 1024-255-63  78 Gbyte
>
> I seem to recall reading of some limitation where you could use CF or ATA,
> but not both.  Not certain it was the net5501 either.  But check the
> archives for Soren's posts.
>
> Or just try removing the CF.
>
> -Jed
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech

same prob...apart from the CF Manfacturere which is SanDisc in my case.

http://lists.soekris.com/pipermail/soekris-tech/2007-October/013132.html