[Soekris] Net4501 - CF Card Inserted = No Boot?

[Jason Rabel]

I didn't make any changes, that's the odd thing. I just unplugged it so I
could move some stuff around, and when I went to plug it back in it will not
POST with the CF card inserted.

Just for kicks I tried flashing back to an older combios, but same results
(so I flashed back to 1.30).


Jason



comBIOS ver. 1.30  20070326  Copyright (C) 2000-2005 Soekris Engineering.

net45xx

0064 Mbyte Memory                        CPU 80486 133 Mhz 


Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int 
-------------------------------------------------------------------
0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000 
0:20:0 100B 0020 02000000 0107 0290 00 3F 00 0000E001 A0000000 10

 5 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.

comBIOS Monitor.   Press ? for help.

> show

ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Disabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 81 F0 FF 
ShowPCI = Enabled
Reset = Hard 

-----Original Message-----


In message <000001c79666$28b57640$0a00a8c0 at Inspiron>, Jason Rabel writes:
> Oddly enough, when I removed the CF card and powered it on, it would boot.
[...]
> I'm at a loss... Anyone have any ideas?

Hi, Jason.

Can you send the output of your current comBIOS configuration to
this mailing list?  No need to fear the worst yet.

Cheers,
Igor.