[Soekris] Problem booting from hard disk

[Igor Sobrado]

In message <4642DCC1.6060407 at fto.de>, Erhard Schwenk writes:
> 
> ConSpeed = 19200
> ConLock = Disabled
> ConMute = Disabled
> BIOSentry = Enabled
> PCIROMS = Enabled
> PXEBoot = Disabled
> FLASH = Primary
> BootDelay = 5
> FastBoot = Disabled
> BootPartition = 3
> BootDrive = 80 81 F0 F1
> ShowPCI = Enabled
> Reset = Hard

Hi Erhard,

Try setting "BootPartition" to "Disabled".  By the way, you want
booting from the HDD, but the first device in BootDrive "80" is
the CF (FLASH is set to primary).  Perhaps you want to set the
FLASH to secondary and HDD to primary or change the boot order.
You will need to reconfigure the operating system if you change
the CF to secondary.

The HDD can be set to cable select.  This way, you will be able
to change CF/HDD settings from the comBIOS (at least if you are
using a supported CF card).

Cheers,
Igor.