[Soekris] Boot 'POST: 0123456789bcefgh*-03-' on net4801

[Jere Virta]

Hi,

I'm using currently a 12V/3.0A powersupply, and you can use over 2.0A
supply, the number is telling only how much current the supply can provide
at maximum. The voltage number is the one you should not exceed, but I don't
remember how much voltage does soekris units tolerate. (20V+ i think anyway)

- jere

Zac Bowling kirjoitti:
> That's what I'm pushing and that's what this power supply from soekris
> is, but still no luck.
>
> I'm afraid to go up any higher then 2.0. Does anyone think its safe? (I
> ask because I burnt out an old net4501 pushing to much in the past) 
>
>
>
>
>
> On Fri, 2007-05-04 at 16:40 -0400, Andy Michaels wrote:
>   
>> On Fri, 4 May 2007, Zac Bowling wrote:
>>
>>     
>>> Here is a pic of the power supply I'm using that I got from Soekris:
>>>
>>> http://www.polystimulus.com/images/Gallery/hq/img-3.jpg
>>>       
>> We recently ordered our pair of 4801's and when we ordered, we ordered the 
>> 1.0A supplies.  We were then told by Soekris that there was some issue 
>> with them, and they recommended the 1.5A supplies.  Try cranking your 
>> bench supply up to 1.5A and see if that works.
>>
>> -Andy
>>
>>     
>>>
>>> On Fri, 2007-05-04 at 14:57 -0500, Zac Bowling wrote:
>>>       
>>>> I took it to work and we have a variable power supply unit and we bumped
>>>> it up and still couldn't get anything different out of it. The original
>>>> powersupply from soekris isn't working neither. I hope my board isn't
>>>> shot.
>>>>
>>>>
>>>> On Fri, 2007-05-04 at 09:24 +0300, jere at muumilaakso.fi wrote:
>>>>         
>>>>> Hello
>>>>>
>>>>> A while ago I got this same error, but nobody could answer what could
>>>>> cause this, not even the provider. But my problem was fixed with a more
>>>>> powerfull powersupply.
>>>>>
>>>>> - jere
>>>>>
>>>>>
>>>>> On Fri, May 4, 2007 9:15 am, Zac Bowling wrote:
>>>>>           
>>>>>> I'm trying to get my net4801 running again, but it seems that no mater
>>>>>> what conditions and configurations I try, I keep getting this error on
>>>>>> boot:
>>>>>>
>>>>>>
>>>>>> POST: 0123456789bcefgh*-03-
>>>>>>
>>>>>>
>>>>>> I've tried all sorts of power configurations and serial cables but I'm
>>>>>> not getting anything but this same error.
>>>>>>
>>>>>> Any ideas or does anyone have a list of error codes?
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Zac Bowling <zac at zacbowling.com>
>>>>>> _______________________________________________
>>>>>> Soekris-tech mailing list
>>>>>> Soekris-tech at lists.soekris.com
>>>>>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>>>>>>
>>>>>>
>>>>>>             
>>>>>
>>>>>           
>>>> _______________________________________________
>>>> Soekris-tech mailing list
>>>> Soekris-tech at lists.soekris.com
>>>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>>>>         
>>> -- 
>>> Zac Bowling <zac at zacbowling.com>
>>>
>>>       
>> _______________________________________________
>> Soekris-tech mailing list
>> Soekris-tech at lists.soekris.com
>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>>
>>     
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Soekris-tech mailing list
>> Soekris-tech at lists.soekris.com
>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>>     

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20070505/711dd368/attachment.html