[Soekris] ata hd issue with 4801 combios 1.30

Mike Brown jmb287 at gmail.com
Sat Mar 31 14:56:45 UTC 2007


Hi All,


Any and all help appreciated.  Thank you, relevant technical goop below.


brand new 4801.  I just flashed the bios to 1.30
Installed a 2.5" HD  WD 400UE

Currently booting from a SanDisk flash.  Want to use the HD for data storage

Here is the errors we get.   below is the entire dmesg

ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=0


dmesg output

FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007
    root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by National Semi (266.65-MHz 586-class
CPU)
  Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
real memory  = 268435456 (256 MB)
avail memory = 253272064 (241 MB)
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0xe100-0xe1ff mem
0xa0000000-0xa000
0fff irq 10 at device 6.0 on pci0
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:00:24:c7:ff:68
sis1: <NatSemi DP8381[56] 10/100BaseTX> port 0xe200-0xe2ff mem
0xa0001000-0xa000
1fff irq 10 at device 7.0 on pci0
sis1: Silicon Revision: DP83816A
miibus1: <MII bus> on sis1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis1: Ethernet address: 00:00:24:c7:ff:69
sis2: <NatSemi DP8381[56] 10/100BaseTX> port 0xe300-0xe3ff mem
0xa0002000-0xa000
2fff irq 10 at device 8.0 on pci0
sis2: Silicon Revision: DP83816A
miibus2: <MII bus> on sis2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis2: Ethernet address: 00:00:24:c7:ff:6a
pci0: <processor> at device 14.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x6100-0x613f,0x6200-0x623f at device 18.0 on
pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <National Geode SC1100 ATA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0
x177,0x376,0xe000-0xe00f at device 18.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <bridge> at device 18.5 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xa0010000-0xa0010fff irq 5 at
device
 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: unable to get the current command byte value.
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounters tick every 1.000 msec
ad0: 38154MB <WDC WD400UE-00KVT0 01.03K01> at ata0-master UDMA33
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=78
140143
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0

ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=78
140156
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=1
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=1
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=1
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=78
140159
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=78
140097
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=0
ad1: 1953MB <SanDisk SDCFX-2048 HDX 4.03> at ata0-slave WDMA2
Trying to mount root from ufs:/dev/ad0s1a

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices

mountroot> ufs:ad1s1
Trying to mount root from ufs:ad1s1
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
defa
ult to deny, logging disabled
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=0
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED>
LBA=0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20070331/cebb0ce3/attachment.html


More information about the Soekris-tech mailing list