[Soekris] installing linux on net4801

[Bob Camp]

Hi

It sounds like two problems at one time to me.

Best guess would be that the kernel boot (as opposed to grub) console  
is set wrong. It could be something as simple as the baud rate.

The second problem could be almost anything. Without the serial  
console working it's impossible to figure out.

There are a lot of other possibilities, but I sure would check the  
console stuff first.

Bob Camp



On Jun 27, 2007, at 4:54 AM, Domenico Cacciari wrote:

> Hi,
> i´ve installed linux ubuntu 2.6.20-16-server with grub on cf card... i
> have all the output on serial console but when the net4801 boots up
> after grub i don´t see nothing, i have only one long and one short  
> flash
> of the disk activity led but no more.
> Ther are some specific parameters for the kernel or what? someone can
> help me? thanks
>
> -- 
> Domenico Cacciari
> Azienda Ospedaliero-Universitaria di Bologna
> Policlinico S.Orsola-Malpighi
> Direzione Tecnologie e Sistemi Informatici
> Settore Rete - PostWebMaster - Accessi Remoti
> Tel. +39-0516363306 Cell. +39-3480622062 +963-96897019
> email domenico.cacciari at aosp.bo.it
> ------------------------------------------------------
> Inchinatevi, arcangeli, nei vostri fiochi soggiorni:
> Prima che voi foste o che qualsiasi cuore palpitasse,
> Presso il suo seggio ella indugiava languida e cortese;
> Egli creo' il mondo come un sentiero erboso
> Affinche' lei vi posasse i piedi erranti.
> 				   W.B.Yeats
> ------------------------------------------------------
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>