[Soekris] 1u case + 4801 + RS-232 board?

[Mike Tancsa]

At 12:20 AM 6/25/2007, Neal R wrote:

>      I will admit to a desire to have more than just a terminal server -
>a proper FreeBSD box with several RS-232 ports and at least two ethernet
>interfaces would be an absolute joy. Is there a low power RS-232 card
>that would work in the 4801? Where could I get a 1U case that would fit
>such a thing?

There is a commell board I use with FreeBSD that works OK.

sio0: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio0: type 16550A
sio0: unable to activate interrupt in fast mode - using normal mode
sio1: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio1: type 16550A
sio1: unable to activate interrupt in fast mode - using normal mode
sio2: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio2: type 16550A
sio2: unable to activate interrupt in fast mode - using normal mode
sio3: <Oxford Semiconductor OX16PCI954 UARTs> on puc0
sio3: type 16550A
sio3: unable to activate interrupt in fast mode - using normal mode

See the list archives for some caveats.  As for case, not sure

         ---Mike