[Soekris] [soekris] net4826 + two 400mw miniPCI?

[Jeongki Min]

Thanks for reply.
I'm using TriBand Rubber Duck Antenna(omnidirectional antenna). I
couldn't find any better gain than that of this antenna which I can
use a/b/g together.

Thanks,
JK


On 1/27/07, Egbert Jan <egbert at vandenbussche.nl> wrote:
>
> Are you using this config as repeater in some way? When you need more
> (bundeled?) power, use antennas with a higher gain. You will be more
> efficient with your input power. An antenna with 3 dB more gain will give
> what you need. If you need omnidirectional radiation you might need more
> power...
>
> Regards
> Egbert Jan NL
>
>
>
> -----Original Message-----
> From: soekris-tech-bounces at lists.soekris.com
> [mailto:soekris-tech-bounces at lists.soekris.com] On Behalf
> Of Jeongki Min
> Sent: Saturday, January 27, 2007 3:43 AM
> To: soekris-tech at lists.soekris.com
> Subject: [Soekris] [soekris] net4826 + two 400mw miniPCI?
>
>
> Hi,
>
> I have a question about using Soekris net4826 with two 400mW MiniPCIs.
> Currently I'm using two 200mW MiniPCIs, but I think I need more tx power.
>
> I'm considering to buy product like below;
> http://www.netgate.com/product_info.php?cPath=26_34&products_id=279
>
> I really don't know about hardware.:(
> It might be stupid thing, but I heard that I have to be careful about
> electric power consumption when I choose MiniPCI.
> Do you think there is no problem on using two 400mW MiniPCI on soekris
> net4826?
> And if I use 400mW MiniPCI, could I can see better tx power?
>
> I would really appreciate it if you give me any information.
>
> Thanks for useful information always,
> JK
>