[Soekris] Segfaults on 4801 when running with ide drive AND cf

[Szentiványi Mátyás]

Hi,

The CF card is not always the slave. It depends on the vendor. My CF card
likes to be the master. I've read somewhere that the HDD should be jumpered
to cable select (the CF card can't be configured you know).

Matyas

On 1/12/07, Heinrich Rebehn <rebehn at ant.uni-bremen.de> wrote:
>
> Poul-Henning Kamp wrote:
> > In message <45A74DAC.6010707 at ant.uni-bremen.de>, Heinrich Rebehn writes:
> >
> >> I am the above mentioned customer :-)
> >>
> >> 0256 Mbyte Memory                        CPU Geode 266 Mhz
> >>
> >> Pri Mas  HITACHI_DK23EA-20               LBA Xlt 1024-255-63  19535
> Mbyte
> >> Pri Sla  DMA FD                          LBA 1006-16-63  507 Mbyte
> >
> > Can you check if the content of these two lines change depending
> > on if you have only one or both of the devices attached ?
> >
> > We could be looking at a CF card which does not implement the
> > master/slave functionality correctly.
> >
>
> I do not have physical access to the box right now, but from memory i
> can tell the the CF is always slave, no matter whether the HD is
> attached or not.
> Does this matter, as long as the two devices do not claim to be the same
> (master/slave)?
>
> --Heinrich
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20070112/3c4c829c/attachment.html