[Soekris] 5501-- Error Programming Flash.

[Mike Tancsa]

I have never seen this error before, is it something to be concerned 
about ?  re-issuing the command the second time worked.


 > show

ConSpeed = 19200
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 81 F0 FF
ShowPCI = Enabled
Reset = Hard

 > set conspeed 9600

Error Programming Flash.

 > set conspeed 9600


--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike at sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike