[Soekris] sata mount

[René Luckow]

You can return the board to Cortex Systems regardless of where it's bought :)

On Dec 12, 2007 4:14 PM, Igor Sobrado <sobrado at fisi35.ciencias.uniovi.es> wrote:
> In message <475FD829.2080701 at gmail.com>, Jochen Grotepass writes:
> > The "hang on boot" issue has meanwhile identified by Soeren and the
> > information on how to fix it can be read here
> > http://www.soekris.com/Issue0005.htm
> >
> > I have tested it - now I miss my Disk LED - but booting after power-off
> > is gone.
>
> Hi Jochen.
>
> Thanks for the reference!  I should read more frequently the list
> of known issues.  ;-)
>
> I think that I will return the board instead of resoldering the pads
> on the capacitor myself.  I suppose that it will be better returning it
> to Cortex Systems, as I am European citizen.  Don't know however if
> I should contact Cortex Systems only if I get the board from them and
> with Soekris Engineering in any other case.
>
> My experience soldering surface mount components is not good at all.
> I only soldered a capacitor on the board of the HDD on a HP 9000;
> after expending a saturday on the physics laboratory learning how
> soldering surface mount components I tried to solder that capacitor.
> The disk worked only for ten months.
>
> I prefer this problem being fixed by someone that has more knowledge
> on soldering.
>
>
> Cheers,
> Igor.
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>



-- 
Kind regards

René Luckow