[Soekris] sata mount

[Igor Sobrado]

In message <475FD829.2080701 at gmail.com>, Jochen Grotepass writes:
> The "hang on boot" issue has meanwhile identified by Soeren and the 
> information on how to fix it can be read here 
> http://www.soekris.com/Issue0005.htm
> 
> I have tested it - now I miss my Disk LED - but booting after power-off 
> is gone.

Hi Jochen.

Thanks for the reference!  I should read more frequently the list
of known issues.  ;-)

I think that I will return the board instead of resoldering the pads
on the capacitor myself.  I suppose that it will be better returning it
to Cortex Systems, as I am European citizen.  Don't know however if
I should contact Cortex Systems only if I get the board from them and
with Soekris Engineering in any other case.

My experience soldering surface mount components is not good at all.
I only soldered a capacitor on the board of the HDD on a HP 9000;
after expending a saturday on the physics laboratory learning how
soldering surface mount components I tried to solder that capacitor.
The disk worked only for ten months.

I prefer this problem being fixed by someone that has more knowledge
on soldering.

Cheers,
Igor.