Hi,
I have my net5501 hooked up to a mac over USB. Console works fine but
with minicom and with cu + sx I cannot seem to download a BIOS. Here
is what happens:
> download -
Start sending file using XMODEM/CRC protocol.
..........................
Error receiving file, aborting.
here is what my console settings look like:
ConSpeed = 9600
ConLock = Enabled
ConMute = Disabled
BIOSentry = Enabled
PCIROMS = Enabled
PXEBoot = Enabled
FLASH = Primary
BootDelay = 5
FastBoot = Disabled
BootPartition = Disabled
BootDrive = 80 81 F0 FF
ShowPCI = Enabled
Reset = Hard
and yes I have turned of hardware and software flow control in
minicom.
Suggestions?
Best,
George