[Soekris] sata mount

[René Luckow]

Hi Randy

Given the use of left angled SATA connectors on the soekris board this
was the best solution using standard cables. The mounting kit comes
with two set of holes for harddrives, one for PATA and one for SATA,
the SATA is the ones closest to the ethernet connectors giving more
room for the cable to move around.

The cable should be placed in a U shape going just around the CF slot, like=
 so:

http://cortexsystems.net/shop/images/satakit/

If you need better images, just let me know.

On Dec 11, 2007 4:09 AM, Randy Bush <randy at psg.com> wrote:
> <http://rip.psg.com/~randy/071211.soek-sata/>
>
> this is what i actually have hacked given not a clue
>   o note the drive mounts far back, away from leds, so cables
>     clear a bit better
>   o cables are a squeeze, and i am not happy with proximity to
>     chips
>   o drive is very close to mini-pci
>
> any other hints appreciated
>
>
> randy
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>



-- 
Kind regards

René Luckow