[Soekris] net5501 pins?

[Bad Dog]

Soekris also has indicated the following regarding 5501 sensor data:

        AVI6 is connected to 2.5V power rail, used by the DDR memory
        chips,
        otherwise it's like the net4801.
        
This means that if you use the lmsensors program, you will need a
(slightly) different config file than that used for the 4801.  If there
is interest, I will post some files and tools that help in this regard.

I am screwing around with the second serial port right now.  If you are
interested, contact me directly.

-bd


On Tue, 2007-12-04 at 09:05 -0500, Tom Mazzotta wrote:
> George,
> 
> I believe the 2nd Serial port is a 10 pin header on the
> right edge of the board, as seen in: http://www.soekris.com/Pictures/net5501_top.jpg
> 
> -tm
> 
> -----Original Message-----
> From: soekris-tech-bounces at lists.soekris.com [mailto:soekris-tech-bounces at lists.soekris.com] On Behalf Of George V. Neville-Neil
> Sent: Tuesday, December 04, 2007 8:20 AM
> To: soekris-tech at lists.soekris.com
> Subject: [Soekris] net5501 pins?
> 
> Hi,
> 
> I cannot find a manual or a diagram that shows what the pins on the
> 5501 correspond to.  Some things, like SATA, PATA are easy enough but
> I'd like to wire up the second serial port so I'll need to know where
> that is.  A search of the archives and net didn't show me anything.
> 
> Best,
> George
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech