[Soekris] net5501 reset console speed

[Lonnie Abelbeck]

The new net5501 is comBIOS 1.32.

I'm not sure what the previous one was, since I only had one chance  
to 'see' it, and didn't take note.

Lonnie

On Aug 29, 2007, at 12:25 PM, Otfried Geffert wrote:

>> A new net5501 board solved my problem.
>
> What comBIOS version has the new (and old) board ?
> The version(s) may be helpful to others,  if they differ.
> Or was it a real hardware problem?
>
> Curious,
> Otfried
>
> ----- Original Message ----- From: "Lonnie Abelbeck"  
> <lists at lonnie.abelbeck.com>
> To: <soekris-tech at lists.soekris.com>
> Sent: Wednesday, August 29, 2007 6:53 PM
> Subject: Re: [Soekris] net5501 reset console speed
>
>
>> Update,
>> A new net5501 board solved my problem.
>> This time I typed "set ConSpeed=9600"
>> It must have been a fluke...
>> m0n0wall runs like a champ on the net5501.
>> Regards,
>> Lonnie
>> On Aug 16, 2007, at 11:16 PM, Lonnie Abelbeck wrote:
>>> I received my first net5501 (own many net4801's)
>>>
>>> It booted up at 19200 on the console just fine...
>>>
>>> I want to install m0n0wall, so I need to set the console to 9600.
>>>
>>> I then typed
>>>
>>> set conspeed 9600
>>> reset
>>>
>>> Now I can't get to the console any longer.
>>>
>>> Using minicom I can't find a matching baud rate.
>>>
>>> What did I do wrong?
>>>
>>> How can I restore the default console speed?
>>>
>>> Lonnie
>>>
>> _______________________________________________
>> Soekris-tech mailing list
>> Soekris-tech at lists.soekris.com
>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>