[Soekris] Digium TDM400P (2 FXS, 2 FXO) on net5501

[Ron]

Graham Freeman schreef:
> On 31 Jul 07, at 02:58, Soren Kristensen wrote:
>
>   
>> The Digium boards should work just fine, they're 3.3V signaling,  
>> although I haven't got around to test any myself.
>>
>> The net5501 has a circuit that will route 12V from the power input  
>> to the PCI 12V lines, so there should be plenty of 12V available  
>> when using a 12V supply. You would want to use the 2.5A supply for  
>> the loading that you're planning.
>>     
>
>
> Excellent.  Thanks for the information!
>
> I'll order a TDM400P (+ modules) now.  I'm moving to Santa Cruz soon,  
> so if you'd like to borrow mine for testing I'd be happy to lend it  
> to you for a day or two.  Alternatively, I'd be happy to report back  
> on my experiences.  Just let me know.
>
> Graham
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>   

FWIW,

The TDM400P card has a seperate power connector which needs to be connected.

So you need to have a split cable some how.

Knowing this, strange that there is a thread about pci specs exceeding, 
you should expect that the extra power is bypassing the pci bus.

Regards,
Ron.