[Soekris] Openwrt on NET-4826

[budgester@budgester.com]

On Tue, Jul 31, 2007 at 05:06:42PM -0700, Ken Caruso wrote:
> Bob Keyes wrote:
> > Hi all,
> > we've got a lot of NET-4826's here. They're being used forour mesh sensor 
> > network project http://www.citysense.net. We want to move from Pyramid to 
> > OpenWRT. I am having problems doing the switch. My plan is to PXE boot 
> > into ram and then flash the image.
> >
> > I am wondering if anyone else has done this before and has any hints or a 
> > HOWTO to offer. Either would be greatly appreciated.
> >   
> We have a LiveCD image that PXE boots a number of operting systems onto
> 48XX/45XX boards including Metrix Pyramid, m0n0wall, pfsense and CuWin.
> It should be as easy as replacing the contents of one of the image files
> with the openwrt image file. This would of course have to be done each
> time you boot the liveCD. I will add openwrt to the list of things to
> add to the next LiveCD image.
> 
> http://pyramid.metrix.net/trac/wiki/InstallingPyramid/PxeBootLiveCD

Or use the excellent instructions on the pyramid page for setting up
your own PXE enviroment.

> 
> 
> -Ken
> ken at metrix.net
> http://metrix.net
> 
> > Regards,
> > Bob Keyes
> > Harvard EECS
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech
> >   
> 
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech