[Soekris] Openwrt on NET-4826

[Ken Caruso]

Bob Keyes wrote:
> Hi all,
> we've got a lot of NET-4826's here. They're being used forour mesh sensor 
> network project http://www.citysense.net. We want to move from Pyramid to 
> OpenWRT. I am having problems doing the switch. My plan is to PXE boot 
> into ram and then flash the image.
>
> I am wondering if anyone else has done this before and has any hints or a 
> HOWTO to offer. Either would be greatly appreciated.
>   
We have a LiveCD image that PXE boots a number of operting systems onto
48XX/45XX boards including Metrix Pyramid, m0n0wall, pfsense and CuWin.
It should be as easy as replacing the contents of one of the image files
with the openwrt image file. This would of course have to be done each
time you boot the liveCD. I will add openwrt to the list of things to
add to the next LiveCD image.

http://pyramid.metrix.net/trac/wiki/InstallingPyramid/PxeBootLiveCD


-Ken
ken at metrix.net
http://metrix.net

> Regards,
> Bob Keyes
> Harvard EECS
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>