[Soekris] Installing Pyramid on a Net4826

[Frederico Marques]

Hi again,

Ok, after booting from PXE and mounting onboard flash /dev/hda1 on /mnt, 
tar zvf pyramid-1.0b1.tar into /:

chroot /mnt
... and then create the file /sbin/grup-setup.sh with the same stuff I've 
pasted.

Create also /boot/grub/grub-script with:

root (hd0,0)
setup (hd0)
quit

Then, run again /sbin/grub-setup.sh. It's the current method on the last 
beta and it worked for me. I think it should work for you too.

--fred

--On September 7, 2006 1:46:10 PM -0500 Mark Nichols 
<mnichols at spanalytics.com> wrote:

> Hi Fred,
>
> From the metrix site: pyramid-1.0b1.tar.gz
>
> I tried 0b2 once, but have gone back to 0b1.
>
> --Mark
>
> Mark Nichols
> Signal Processing Analytics
> (804) 364-1050
> www.spanalytics.com
>
> On Thu Sep  7 12:25 , Frederico Marques  sent:
>
>> Hi Mark,
>>
>> Ok, first thing, what version of Pyramid Linux are you trying to
>> install?  The last beta got some bugs we need to fix before installing
>> it on the  Soekris, including grub configuration.
>>
>> --fred
>>
>> --On September 7, 2006 1:19:56 PM -0500 Mark Nichols
>> mnichols at spanalytics.com> wrote:
>>
>>> Hi Fred,
>>>
>>> Sorry if I sound like I don't know what I'm doing--I don't.  I didn't
>>> have the file you mentioned, so I created it  with the 6 lines you
>>> listed.  I typed it at the chroot prompt, and it goes off to grub and
>>> then exits.  I also typed  each line from the command line, and all of
>>> the mknod lines returned "file exists", and the cat line returned file
>>> does not exist, and I indeed do not have a /grub/grub-script file.
>>>
>>> In any case, after doing the above, and rebooting, or doing the above,
>>> and running grub-install '(hd0)', my card  won't boot.
>>>
>>
>> _______________________________________________
>> Soekris-tech mailing list
>> Soekris-tech at lists.soekris.com
>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>
>