[Soekris] (no subject)

[prashanth hegde]

I am trying to boot linux kernel version -4.6.10 from the flash on net4521 
board.
These are  the messages I am getting..

-----------------------START MESSAGES ---------------
Linux version 2.6.10 (root at localhost.localdomain) (gcc version 3.3.3 
20040412 (Red Hat Linux 3.3.3-7)) #6 Thu Aug 31 18:29:26 IST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000004000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
64MB LOWMEM available.
DMI not present.
Built 1 zonelists
Kernel command line: ro root=/dev/hda1 console=tty0 console=ttyS0,115200
Initializing CPU#0
Adeos 2.6r12/x86: Root domain Linux registered.
PID hash table entries: 512 (order: 9, Untitled 18192 bytes)
Using pit for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 62660k/65536k available (1128k kernel code, 2452k reserved, 362k 
data, 100k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: AMD 486 DX/4-WB stepping 04
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Initializing Cryptographic API
Non-volatile memory driver v1.2
i8042.c: Can't read CTR while initializing i8042.
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
loop: loaded (max 8 devices)
elevator: using anticipatory as default io scheduler
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: SAMSUNG CF/ATA, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 1018080 sectors (521 MB) w/0KiB Cache, CHS=1010/16/63
hda: hda1
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Adeos: Pipelining started.
hda: hda1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 100k freed
----------------------------------------------END MESSAGES 
------------------
It hangs after this point. I have copied the relevant applications and 
libraries to the respective directories.
Please suggest me what could be going wrong?

Thanks in advance,

_________________________________________________________________
Sexy, sultry, sensuous. - see why Bipasha Basu is all that and more. Try MSN 
Search http://server1.msn.co.in/Profile/bipashabasu.asp