[Soekris] Help with my new 4801

[Pol Llovet]

Ah!  I didn't know that the error light was normal on boot.  I assumed
"something bad" was happening and I removed the power ASAP.  I will try
it out again with the 1A power.  Does it really matter if i use 1 or 1.5
Amps? 

If it doesn't drop the error light after 30 seconds, I'll do a serial
console diagnostic and post what I see.

> Did you install the .img to the CF card using another computer as shown
> on the monowall site?   Just copying the image file to the CF isn't
> going to work. 

I used the m0n0wall provided tool to install the img to the CF. 

Thanks for your help, I really appreciate it!

Pol


Pol M. Llovet

| CTO                   |
| Resort Closings, Inc. |  unbeingdead isn't beingalive
| ph.  406.585.0688 x11 |                  :ee cummings
| fax  406.585.1799     |