[Soekris] CF master or slave?

[Michael Scheliga]

>...<
> By the way, is there a trick to extracting these cards from the CF
> slot in the net4801?  There's a serial connector right next to it,
> leaving no room to grab the sides to pull.  I've been prying it out at
> a corner with a small screwdriver, which makes me very uneasy.
> 
> -David
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech

Some people have written about putting a tab of tape on the CF for
a place to grab.  Like a tab of scotch tape or something stronger
yet sticky, from the top of the CF, away from the board doubled over
And then to the bottom, so you have a handle.  Others have just made
it a habit to leave it unplugged ever so slightly so you can get the
edge of a screwdriver or fingernail between the card and the socket.

Mike