[Soekris] 4511 Linux init 6 wants to reboot using PXE

[Mr. Bill]

Hello Larry,

I've always been wondering if there was a way to make the Soekris do a
PXE TFTP boot by default. Apparently you've found one. Perhaps the
Soekris people could give us a tip on how to boot the Soekris
unambiguously in either way. Would it be possible to reprogram the
firmware so that it accepts a "Boot from.." parameter?

Bill Maas

On Tue, 2006-10-10 at 22:25 -0400, Larry Boehm wrote: 
> I loaded my new 4511 with debian.
> If unplug and hard restart, everything works fine and it boots in
> Linux from the CF card.
> If from linux I restart using init 6 (soft shutdown and reboot), it
> tries to do a PXE TFTP boot.
> Is there a setting in the BIOS I should change to adjust this?
>  
> show
>  
> ConSpeed = 19200
> ConLock = Enabled
> ConMute = Disabled
> BIOSentry = Enabled
> PCIROMS = Enabled
> PXEBoot = Enabled
> FLASH = Primary
> BootDelay = 5
> FastBoot = Disabled
> BootPartition = Disabled
> BootDrive = 80 81 F0 FF
> ShowPCI = Enabled
> Reset = Hard
>  
> Thanks
> -Larry
>  
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech