[Soekris] net 4511 PXE boot won't mount NFS

Larry Boehm LarryBoehm at BellSouth.net
Mon Oct 2 04:38:41 UTC 2006 

Hi All,
I'm trying to configure a 4511 to use debian per Mike's page.
I'm on 12+ hours and have no more hair left to pull.
 
DHCP is running.
TFTP is running
I have checked and nfsd is running too.
I went to another linux box and am able to mount /nfsroot/debian to it from
the tftpserver
i've turned off all firewalls.
 
Using boot f0 works and I get DHCP response and the kernel loads up.
At the very bottom..this is where it stops
 
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.0.26
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.0.26
RPC: sendmsg returned error 101
portmap: RPC call returned error 101
Root-NFS: Unable to get mountd port number from server, using default
RPC: sendmsg returned error 101
mount: RPC call returned error 101
Root-NFS: Server returned error -101 while mounting /nfsroot/debian
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Insert root floppy and press ENTER
 
Can anyone offer some advice..I'm stuck?
thank you
-Larry
 
POST: 012345d6789bcefghiajklnopq,,,tvwxy

comBIOS ver. 1.15 20021013 Copyright (C) 2000-2002 Soekris Engineering.

net45xx

CPU 80486 100 Mhz 

0000 Mbyte Memory

snip......

0032

Pri Mas SanDisk SDCFH-128 LBA 980-8-32 125 Mbyte

PXE-M00: BootManage UNDI, PXE-2.0 (build 082)

Slot Vend Dev ClassRev Cmd Stat CL LT HT Base1 Base2 Int 

-------------------------------------------------------------------

0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000 00000000 00

0:09:0 104C AC50 06070002 0107 0210 10 3F 02 A0000000 020000A0 10

0:18:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0001000 11

0:19:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0002000 05

Seconds to automatic boot. Press Ctrl-P for entering Monitor.

5

4

comBIOS Monitor. Press ? for help.

> boot f0

BootManage UNDI, PXE-2.0 (build 082)

BootManage PXE-2.0 PROM 1.0, NATSEC 1.0, SDK 3.0/082 (OEM52)

Copyright (C) 1989,2000 bootix Technology GmbH, D-41466 Neuss.

PXE Software Copyright (C) 1997, 1998, 1999, 2000 Intel Corporation.

Licensed to National Semiconductor

CLIENT MAC ADDR: 00 00 24 C1 1A 84. 

DHCP...spinner...

CLIENT IP: 192.168.0.105 MASK: 255.255.255.0 DHCP IP: 192.168.0.26

GATEWAY IP: 192.168.0.1 

TFTP.

TFTP.-snip...stuff on the screen

PXELINUX 2.11 2004-08-16 Copyright (C) 1994-2004 H. Peter Anvin

snip....more stuff on the screen

Linux version 2.4.18 (root at rocket) (gcc version 2.95.4 20011002
(Debian prerelease)) #8 Mon Jun 17 09:49:36 PDT 2002

BIOS-provided physical RAM map:

BIOS-e801: 0000000000000000 - 000000000009f000 (usable)

BIOS-e801: 0000000000100000 - 0000000002000000 (usable)

On node 0 totalpages: 8192

zone(0): 4096 pages.

zone(1): 4096 pages.

zone(2): 0 pages.

Kernel command line: BOOT_IMAGE=vmlinuz
ip=192.168.0.105:192.168.0.26:192.168.0.1:255.255.255.0
console=ttyS0,19200n81 root=/dev/nfs
nfsaddrs=192.168.0.105:192.168.0.26:255.255.255.0:soekris:eth0
nfsroot=192.168.0.26:/nfsroot/debian panic=10

Initializing CPU#0

Calibrating delay loop... 49.86 BogoMIPS

Memory: 29756k/32768k available (1321k kernel code, 2624k reserved, 329k
data, 200k init, 0k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

CPU: AMD 486 DX/4-WB stepping 04

Checking 'hlt' instruction... OK.

POSIX conformance testing by UNIFIX

PCI: PCI BIOS revision 2.00 entry at 0xf00e1, last bus=1

PCI: Using configuration type 1

PCI: Probing PCI hardware

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

Journalled Block Device driver loaded

JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications
AB.

pty: 256 Unix98 ptys configured

keyboard: Timeout - AT keyboard not present?(ed)

keyboard: Timeout - AT keyboard not present?(f4)

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

ttyS01 at 0x02f8 (irq = 3) is a 16550A

Real Time Clock Driver v1.10e

block: 64 slots per queue, batch=16

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

Uniform Multi-Platform E-IDE driver Revision: 6.31

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

hda: SanDisk SDCFH-128, ATA DISK drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hda: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32

Partition check:

hda: hda1

floppy0: no floppy controllers found

loop: loaded (max 8 devices)

natsemi.c:v1.07 1/9/2001 Written by Donald Becker <becker at scyld.com>

http://www.scyld.com/network/natsemi.html

(unofficial 2.4.x kernel port, version 1.07+LK1.0.14, Nov 27, 2001 Jeff
Garzik, Tjeerd Mulder)

eth0: NatSemi DP8381[56] at 0xc2800000, 00:00:24:c1:1a:84, IRQ 11.

eth1: NatSemi DP8381[56] at 0xc2802000, 00:00:24:c1:1a:85, IRQ 5.

blkmtd: error, missing `device' name

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 2048)

eth0: link up.

eth0: Setting full-duplex based on negotiated link capability.

eth1: autonegotiation did not complete in 4000 usec.

IP-Config: Incomplete network configuration information.

eth0: remaining active for wake-on-lan

eth1: remaining active for wake-on-lan

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

Looking up port of RPC 100003/2 on 192.168.0.26

RPC: sendmsg returned error 101

portmap: RPC call returned error 101

Root-NFS: Unable to get nfsd port number from server, using default

Looking up port of RPC 100005/1 on 192.168.0.26

RPC: sendmsg returned error 101

portmap: RPC call returned error 101

Root-NFS: Unable to get mountd port number from server, using default

RPC: sendmsg returned error 101

mount: RPC call returned error 101

Root-NFS: Server returned error -101 while mounting /nfsroot/debian

VFS: Unable to mount root fs via NFS, trying floppy.

VFS: Insert root floppy and press ENTER

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20061002/bd2a4796/attachment.html

More information about the Soekris-tech mailing list