[Soekris] Soekris 4526 - Null Modem Cable

[Moot Account]

Aaron,

Try to disable all flow controls (hardware and software).

-Lenmarc

On 11/11/06, Aaron <kc2nda at hvc.rr.com> wrote:
> I found a couple links on communicating with the board via a NULL MODEM
> cable.  All of them have been different so far.  I made two of them already
> and come up with nothing but garbage when using Hyperterminal through
> windows to try to see the input from the board (when power cycling).  I have
> the com port settings on 19200,n,8,1,hardware control.    I tried it on two
> different machines, both show garbage. I thought it might be a baud rate
> issue, but am not quite sure.  I was also wondering if the power would be an
> issue.  I have a 12v 1000mA supply hooked to it.  Anyone have any
> suggestions? Thanks in advance...