[Soekris] Ethernet Power/Requirements

[Michael Scheliga]

> -----Original Message-----
> From: soekris-tech-bounces at lists.soekris.com [mailto:soekris-tech-
> bounces at lists.soekris.com] On Behalf Of Aaron
> Sent: Thursday, November 09, 2006 9:36 PM
> To: soekris-tech at lists.soekris.com
> Subject: [Soekris] Ethernet Power/Requirements
> 
> Thanks for all the replies.  I found that you have to have atleast 12V
of
> power for the ethernet adapter to work.  Now the link light shows... I
> guess
> the next question is how to re-flash the onboard flash without knowing
the
> root password?  (I got this board used... ;)
> Thanks.
> 
> Aaron
> 
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech


PXE boot it and install another OS.
There is a ton of info in the archives and on Google.
It is worth learning how to set this up if you're going to support
these.

Mike