[Soekris] VPN Branch Office Tunnel using m0n0wall

[Torben Petersen Egmose]

on m0n0wall disable the RFC1918 block.
give it at static ip on the LAN of the Speedstreem.
 
PPTP/L2TP: forward port 1723 tcp and GRE (type 47) to the m0n0wall 
IPsec: forward port 500 udp to the m0n0wall
 
Now connect your LAN to the lan port of the m0n0wall.
--internet---DSL-router---m0n0wall---LAN
 
If you wanna enable Wifi access from the speedstreem you need to activate Advanced NAT.

________________________________

Fra: soekris-tech-bounces at lists.soekris.com [mailto:soekris-tech-bounces at lists.soekris.com] På vegne af Peter Herzog
Sendt: 8. november 2006 17:23
Til: soekris-tech at lists.soekris.com
Emne: [Soekris] VPN Branch Office Tunnel using m0n0wall


Hey guys,
 
I am trying to create a branch office tunnel between a Watchguard Firebox III and a Soekris NET4511 running the latest version of m0n0wall.  The only thing between the two is a Siemens Speedstreem 6520 aDSL modem.  I have read documentation that says you cannot have a m0n0wall behind a NAT.  Is there anyway around this?  The 6520 is a wireless router with 4 ports.  Apparently my ISP disabled the feature of turning one port into a WAN port for pass through.  Is this what I need to do - create a passthrough??  
 
Any help would be appreciated!

-- 
Peter Herzog 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20061108/0b891a9f/attachment.html