sequethin at gmail.com
Fri Nov 3 19:36:56 UTC 2006
I'm currently using an adapter card I found on netgate.com, it might
work for you?
On Nov 3, 2006, at 2:28 PM, Srikanth Chavali wrote:
> I dont think the power supply fried in the first place becoz the
> box boots up fine without this card and looking to work fine.
> Having said that since it smoked i have another net4801 box into
> which i have'nt plugged the PCI/PCMCIA card.
> So with that net4801 box what are my options as far as this PCI/
> PCMCIA card is concerned? Also what are the other cards that are
> known to work well with net 4801?
> The other thing is you said i have fit the card backwards into
> net4801. If this was the case the PCI/PCMCIA card should'nt have
> keyed into the slot in the first place. When i plugged the PCI/
> PCMCIA card into the net4801 it fit/keyed in well. I plugged it in
> after carefully looking at the pins.
> On 11/306, Poul-Henning Kamp <phk at phk.freebsd.dk> wrote:
> In message
> <baeafc080611031106v2f497f99gfe9f6e242865e21c at mail.gmail.com>, "Srik
> anth Chavali" writes:
> >Hmm. So whats the way out for me here? Are there any cards that
> are known to
> >work well with this box?
> Not after you fried the power supply.
> Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
> phk at FreeBSD.ORG | TCP/IP since RFC 956
> FreeBSD committer | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by
> srikanth chavali
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Soekris-tech