[Soekris] PCD-RP-101CS

[Srikanth Chavali]

I dont think the power supply fried in the first place becoz the box boots
up fine without this card and looking to work fine. Having said that since
it smoked i have another net4801 box into which i have'nt plugged the
PCI/PCMCIA card.

So with that net4801 box what are my options as far as this PCI/PCMCIA card
is concerned? Also what are the other cards that are known to work well with
net 4801?

The other thing is you said i have fit the card backwards into net4801. If
this was the case the PCI/PCMCIA card should'nt have keyed into the slot in
the first place. When i plugged the PCI/PCMCIA card into the net4801 it
fit/keyed in well. I plugged it in after carefully looking at the pins.

Regards,

On 11/306, Poul-Henning Kamp <phk at phk.freebsd.dk> wrote:
>
> In message <baeafc080611031106v2f497f99gfe9f6e242865e21c at mail.gmail.com>,
> "Srik
> anth Chavali" writes:
>
> >Hmm. So whats the way out for me here? Are there any cards that are known
> to
> >work well with this box?
>
> Not after you fried the power supply.
>
> --
> Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
> phk at FreeBSD.ORG         | TCP/IP since RFC 956
> FreeBSD committer       | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by
> incompetence.
>



-- 
srikanth chavali
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.soekris.com/pipermail/soekris-tech/attachments/20061103/c50f32d7/attachment.html