[Soekris] pciide errors, fresh install

[Johnny Vestergaard]

Hi

I just recently bought my first soekris 4801, decided to put a 2.5"  
E5410 hitachi harddrive in.
When i installed first time i noticed a strange sound comming from  
the harddrive, but i carried on with the install.
i got the following errors when formatting the harddrive with the  
openbsd installer:

--
The next step *DESTROYS* all existing data on these partitions!
Are you really sure that you're ready to proceed? [no] y
/dev/rwd0a:     3072320 sectors in 3048 cylinders of 16 tracks, 63  
sectors
         1500.2MB in 10 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
/dev/rwd0d:     5119632 sectors in 5079 cylinders of 16 tracks, 63  
sectors
         2499.8MB in 16 cyl groups (328 c/g, 161.44MB/g, 20608 i/g)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 16384
         c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x60
wd0d: device timeout writing fsbn 96 of 96-127 (wd0 bn 9364416; cn  
9290 tn 1 sn 33), retrying
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 16384
         c_skip: 0
pciide0:0:0: bus-master DMA error: missing interrupt, status=0x20
wd0: transfer error, downgrading to Ultra-DMA mode 0
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0
wd0f: device timeout writing fsbn 96 of 96-127 (wd0 bn 15532368; cn  
15409 tn 1 sn 33), retrying
wd0: soft error (corrected)

-- 5-6 of these.

I decided to return the harddrive and got a replacement. Now my new  
drive does excatly the same.
Anyone ideas?

/jkv